PLA Glow In The Dark Noctilucent Filament 1.75mm Plastic 3D Printer Materials Glowing Rainbow Red Firefly Green Filaments

Attention
Absorbing ultraviolet light and light will emit light, and the effect of ultraviolet light is good. After absorbing the light source for 5-10 minutes, it will emit light for 2-5 hours in the dark

Features
● Glow in dark
●Stable diameter without blocking the nozzle
●No bubbles, rich colors, good printing effect
●Special production process, printing without deformation and warping
●PLA environmental protection material, no peculiar smell, no harm.Give you a wonderful printing experience.

Parameter
3D Printer Filament Net Weight: 1kg/500g/250g/100g
Gross weigh: 1.3kg/0.67kg/0.37kg/0.14kg spool
Material: PLA
Filament Diameter: 1.75mm
Printing Temperature:190-220°C (Different printer and filament ask different temperature, please print a temp tower first.)
Infill Speed: 20-50mm/s
Heated Bed: Not required but can be used (up to 60 °C)

Note: The filaments are all vacuum packaged, but the vacuum packaging may enter some air after being squeezed by other packages for long-distance transportation, this case it will not affect the normal use of the filament. (There is a desiccant in the vacuum package that can absorb water in the air ).